DASHCAM
Dashcam for construction machinery & vehicles
Full transparency about journeys, incidents and vehicle use.
- Live video & automatic event recording
- Installation in just a few minutes
- Seamless integration into the syniotec platform
Integrated GNSS tracking
Precise positioning in real time.
Video & audio recording
Saved recordings for documentation and preservation of evidence.
Parking mode
Continuous monitoring even at standstill.
Live streaming
Quick installation and direct access to video data remotely.
4G LTE connectivity
Always connected to your vehicle or machine.
Bluetooth® + Wi-Fi
Position determination via Wi-Fi in the event of GNSS failure.
Dashcam for the construction site
DASH is the next-generation intelligent LTE dashcam that combines high-resolution video recording with full telematics.
It can be operated as a standalone solution or expanded with an additional camera.
Optional ADAS and driver monitoring systems actively increase safety and help to reduce risks in fleet operations.
What equipment is DASH suitable for?
DASH is designed for vehicle-based applications in construction, service and logistics environments and is ideal for:
- PASSENGER CAR
- Transporter
- Service vehicles
- Construction site & project vehicles
- Rental & pool vehicles
- Light commercial vehicles
- Heavy commercial vehicles & construction site logistics
- Construction machinery such as excavators, wheel loaders or cranes
All data flows directly into the syniotec platform and is visible in SAM & RAM.
The dashcam can optionally be extended with an additional camera, e.g. for:
- Interior monitoring
- Load compartment or rear view
You can see this data for your vehicle
DASH is used to record and transmit the following data, among others:
- GPS position
- Vehicle speed
- Operating & travel times
- Idle times
- Event data (e.g. shock, accident, heavy braking)
All data is available centrally in the syniotec platform.
Resources & Documents
Users
Machines
Technical data from DASHCAM
General information
Internal battery
Li-Polymer 7500 mAh / 3.6 V
Temperature
Operation: -30 °C to +80 °C
Weight
410 g
Size (L×W×H)
185.4 × 84.7 × 31.3 mm
Water resistance
IP67
Certifications
Integrations
Charging and data connection
Type-C connection
Network & GNSS antenna
internal
LED display
Network, GNSS and battery level
Light sensor
for dismantling alarm
Temperature sensor
Built-in temperature sensor
Mobile network
Bluetooth®
BLE 5.3 (completely wireless sensor solution)
LTE
4G LTE CAT 1
Operating band
LTE FDD Cat 1:
B1 / B2 / B3 / B4 / B5 / B7 / B8 / B12 / B13 / B17 / B18 / B19 / B20 / B25 / B26 / B28 / B66
LTE TDD Cat 1:
B34 / B38 / B39 / B40 / B41
GSM (2G):
850 / 900 / 1800 / 1900 MHz
Data transmission
LTE-FDD:
Max. 10 Mbps (DL)
Max. 5 Mbps (UL)
LTE-TDD:
Max. 8.96 Mbps (DL)
Max. 3.1 Mbps (UL)
GPRS:
Max. 85.6 Kbps (DL)
Max. 85.6 Kbps (UL)
GNSS specifications
GNSS chipset
All-in-one GNSS receiver
GNSS system
GPS + GLONASS + Beidou + Galileo + QZSS
Sensitivity
Acquisition: -147 dBm
Tracking: -166 dBm
Reacquisition: -159 dBm
Position accuracy (CEP)
Autonomous: < 2 m
TTFF (-130 dBm without Easy)
Cold start: < 28 s
Warm start: < 25 s
Hot start: < 1 s
Receiver type
GNSS: 47 channels (tracking & acquisition)
FAQs
What is the purpose of the telematics boxes?
The telematics boxes are used to transfer the machine data to our SAM software and our RAM solution for construction machinery rental companies. The devices send information such as live location and technical data, such as operating hours, which can be conveniently accessed through the app.
Why are there different telematics boxes?
Since construction machinery varies widely, we at syniotec have developed different versions of telematics boxes, each tailored to specific types of construction machines. Which ones are ultimately suitable is discussed individually between syniotec and the customer during the planning stage.
How do I obtain the machine data?
Depending on the device, there are various options for reading out the machine data. CORE and LINK send the data actively and independently. For passive tags there are our TAGS with these options:
QR: Quick Response (=QR) is a two-dimensional code on the telematics device. This code is scanned with our app to access the individual device profile with all the information.
NFC: NFC stands for Near Field Communication and enables contactless exchange over a short distance. The smartphone is simply held up to the device to call up the information.
Hardware for every application
Edge
Ideal for construction machinery such as excavators or wheel loaders.
Link
Ideal for attachments such as vibratory plates or shovels.
OBD
Ideal for cars and trucks.
Passive telematics
Direct access to the device profile.
Digital access to your equipment
In addition to the IoT, which reliably sends central data to SAM & RAM, we offer passive telematics. Clearly visible on the equipment, these enable digital access to the individual device profile via QR and NFC scan. We also offer different variants:
TAGS for construction machinery and large equipment
TOOL-TAGS for tools and small equipment
Chain-TAGS for heavy chains
QR-Sticker
Fewer construction sites on construction sites
Software for construction companies
Simple operation and a complete overview for your construction company: Digitize and automate processes now with SAM. More about SAM
Software for construction machinery rental companies
RAM was specially developed for the construction machinery rental industry. Analysis, tracking, digital handover protocols: all in one software. More about RAM
Telematics for construction machinery
IoT devices for optimal tracking and fleet management. Important machine data is visualized directly in SAM & RAM. More about our IoT
