EDGE
Telematics for construction machinery
Full overview of your construction machinery – anytime and anywhere.
- Live tracking & CAN bus vehicle data in real time
- Transparent evaluation of kilometers & usage
- Installation in approx. 15 minutes
Odometer
Automatically records kilometers driven
Energy-saving operation
No battery discharge when the ignition is switched off
Live GPS tracking
Always know where your devices are
Global network coverage
LTE CAT M1/NB1 with 2G fallback
Operating hours recording
Automatically document operating hours and idle times
Waterproof and weatherproof
Withstands weather and adverse conditions
What equipment is EDGE suitable for?
EDGE was specially developed for machines with a power supply:
- Construction machinery
- Lifting technology
- Special machines
- Pumps & Generators
Ideal for construction companies and machine rental companies.
Resources & Documents
Users
Machines
Technical data from EDGE
General information
Power supply
8 V to 32 V DC
Backup battery
Li-Polymer 700 mAh
Temperature
Operation: -30 °C to +80 °C
Storage: -40 °C to +80 °C
Weight
110 g
Size (L×W×H)
102 × 46 × 20.5 mm
Water resistance
IP67
Certifications
Integrations
Digital inputs
2 digital inputs including:
1 positive trigger for ignition detection
1 negative trigger input for normal use
Digital outputs
1 digital output, open drain, 150 mA max.
Latched digital output
1 digital output with internal latch circuit, open drain, 150 mA max. switching current
Serial connection
1 serial RS232 connection
GPS antenna
internal only
LTE antenna
internal only
LED display
CEL, GNSS, PWR
Mobile network - LTE
Operating band
Cat M1 / Cat NB1
LTE-FDD: B1 / B2 / B3 / B4 / B5 / B8 / B12 / B13 / B18 / B19 / B20 / B25 / B28
Data transmission
eMTC (DL) 375 Kbps
eMTC (UL) 375 Kbps
NB1 (DL) 32 Kbps
NB1 (UL) 70 Kbps
EGPRS
Frequency
EGPRS 850 / 900 / 1800 / 1900 MHz
Data transmission
GPRS and EDGE multi-slot class 33 (standard)
GNSS
GNSS chipset
u-blox All-in-One GNSS receiver
Sensitivity
Autonomous: -147 dBm
Hot start: -156 dBm
Reacquisition: -160 dBm
Tracking: -162 dBm
Position accuracy (CEP)
Autonomous: < 2.5 m
TTFF (open sky)
Cold start: Ø 27 s
Warm start: Ø 27 s
Hot start: Ø 1 s
FAQs
What is the purpose of the telematics boxes?
The telematics boxes are used to transfer the machine data to our SAM software and our RAM solution for construction machinery rental companies. The devices send information such as live location and technical data, such as operating hours, which can be conveniently accessed through the app.
Why are there different telematics boxes?
Since construction machinery varies widely, we at syniotec have developed different versions of telematics boxes, each tailored to specific types of construction machines. Which ones are ultimately suitable is discussed individually between syniotec and the customer during the planning stage.
How do I obtain the machine data?
Depending on the device, there are various options for reading out the machine data. CORE and LINK send the data actively and independently. For passive tags there are our TAGS with these options:
QR: Quick Response (=QR) is a two-dimensional code on the telematics device. This code is scanned with our app to access the individual device profile with all the information.
NFC: NFC stands for Near Field Communication and enables contactless exchange over a short distance. The smartphone is simply held up to the device to call up the information.
Hardware for every application
dot
BLE Beacon for small machines & devices.
Link
Ideal for attachments such as vibratory plates or shovels.
OBD
Ideal for cars and trucks.
Passive telematics
Direct access to the device profile.
Digital access to your equipment
In addition to the IoT, which reliably sends central data to SAM & RAM, we offer passive telematics. Clearly visible on the equipment, these enable digital access to the individual device profile via QR and NFC scan. We also offer different variants:
TAGS for construction machinery and large equipment
TOOL-TAGS for tools and small equipment
Chain-TAGS for heavy chains
QR-Sticker
Fewer construction sites on construction sites
Software for construction companies
Simple operation and a complete overview for your construction company: Digitize and automate processes now with SAM. More about SAM
Software for construction machinery rental companies
RAM was specially developed for the construction machinery rental industry. Analysis, tracking, digital handover protocols: all in one software. More about RAM
Telematics for construction machinery
IoT devices for optimal tracking and fleet management. Important machine data is visualized directly in SAM & RAM. More about our IoT
