OBD
Telematics for passenger cars
Full transparency about location, usage and vehicle status – directly via the OBD-II interface.
- CAN bus vehicle data in real time
- Plug-and-play installation in under 2 minutes
- Ideal for passenger cars and light commercial vehicles
CAN bus data
LINK: Automatic detection of nearby beacons via Bluetooth® positioning.
E-car compatible
Comprehensive data monitoring also for electric vehicles
Live GPS tracking
Always know where your devices are
Plug-and-play installation
Installation is simple and quick and takes less than 2 minutes.
Global network coverage
LTE Cat 1 with 2G GSM fallback.
Bluetooth®
BLE 4.0 positioning for beacons in the vicinity.
What equipment is the OBD suitable for?
OBD is ideal for:
- PASSENGER CAR
- Company vehicles
- Service vehicles
- Light commercial vehicles
Ideal for construction companies, service fleets and company fleets.
Resources & Documents
Users
Machines
Technical data from OBD
General information
Power supply
10 V to 30 V DC
Internal battery
Internal Li-Ion battery, 170 mAh, 3.7 V
Temperature
Operation: -40 °C to +85 °C
Storage: -40 °C to +85 °C
Weight
63 g
Size (L×W×H)
67.2 × 49.6 × 25 mm
Bluetooth®
Bluetooth® 4.0 + Low Energy (LE)
OBD-II Y-cable / splitter (1-in-2)
included
Certifications
Integrations
OBD-II connection
Supplies the device with power and enables OBD-II data to be read out (ISO 15765).
Compatible with legally prescribed protocols for vehicles built in 2008 or later (USA).
Mobile antenna
internal: LTE Cat 1 with 2G fallback
GNSS antenna
2 internal GNSS antennas (automatic signal selection)
BLE antenna
internal: Bluetooth® 4.0 + LE
LED display
CELL – shows mobile phone connection
GNSS – shows GPS/GNSS status
LEDs installed internally, visible on the top side
Mobile network
Technology
LTE Cat 1, GSM (2G)
2G frequency bands
MeiG SLM320-PE2C: GSM: B2 / B3 / B5 / B8 MeiG SLM320-L16A: GSM: B2 / B3 / B5 / B8
4G frequency bands (LTE)
MeiG SLM320-PE2C: LTE-FDD: B1 / B3 / B7 / B8 / B20 / B28 LTE-TDD: B38 / B40 / B41 MeiG SLM320-L16A: LTE-FDD: B1 / B2 / B3 / B4 / B5 / B7 / B8 / B20 / B28 LTE-TDD: B40
Data transmission
LTE FDD: up to 10 Mbit/s (download), up to 5 Mbit/s (upload) LTE TDD: up to 8 Mbit/s (download), up to 2 Mbit/s (upload) GSM (GPRS): up to 85.6 kbit/s (download & upload)
GNSS
GNSS chipset:
All-in-one GNSS receiver
GNSS system:
GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
Sensitivity
Tracking: -165 dBm
Position accuracy (CEP)
Autonomous: < 2.5 m
TTFF
Cold start: < 35 s
Warm start: < 25 s
Hot start: < 1 s
Speed accuracy
< 0.1 m/s (with ±15 % deviation)
FAQs
What is the purpose of the telematics boxes?
The telematics boxes are used to transfer the machine data to our SAM software and our RAM solution for construction machinery rental companies. The devices send information such as live location and technical data, such as operating hours, which can be conveniently accessed through the app.
Why are there different telematics boxes?
Since construction machinery varies widely, we at syniotec have developed different versions of telematics boxes, each tailored to specific types of construction machines. Which ones are ultimately suitable is discussed individually between syniotec and the customer during the planning stage.
How do I obtain the machine data?
Depending on the device, there are various options for reading out the machine data. CORE and LINK send the data actively and independently. For passive tags there are our TAGS with these options:
QR: Quick Response (=QR) is a two-dimensional code on the telematics device. This code is scanned with our app to access the individual device profile with all the information.
NFC: NFC stands for Near Field Communication and enables contactless exchange over a short distance. The smartphone is simply held up to the device to call up the information.
Hardware for every application
Edge
Ideal for construction machinery such as excavators or wheel loaders.
Link
Ideal for attachments such as vibratory plates or shovels.
DOT
BLE Beacon for small machines & devices.
Passive telematics
Direct access to the device profile.
Digital access to your equipment
In addition to the IoT, which reliably sends central data to SAM & RAM, we offer passive telematics. Clearly visible on the equipment, these enable digital access to the individual device profile via QR and NFC scan. We also offer different variants:
TAGS for construction machinery and large equipment
TOOL-TAGS for tools and small equipment
Chain-TAGS for heavy chains
QR-Sticker
Fewer construction sites on construction sites
Software for construction companies
Simple operation and a complete overview for your construction company: Digitize and automate processes now with SAM. More about SAM
Software for construction machinery rental companies
RAM was specially developed for the construction machinery rental industry. Analysis, tracking, digital handover protocols: all in one software. More about RAM
Telematics for construction machinery
IoT devices for optimal tracking and fleet management. Important machine data is visualized directly in SAM & RAM. More about our IoT
