VOLT

Telematics for trailers & mobile machines

Full transparency of assets with their own power supply or without a fixed connection.

Bluetooth®

Bluetooth®: BLE 5.0 positioning for beacons

Long-life battery

Lasts up to four months without an external power source

Live GPS tracking

Always know where your devices are

Global network coverage

LTE CAT M1/NB1 with 2G fallback

Operating hours recording

Automatically document operating hours and idle times

Waterproof and weatherproof

Withstands weather and adverse conditions

What equipment is VOLT suitable for?

VOLT is ideal for assets that are used on the move or do not have a permanent power source:

Trailer
Lifting technology
Construction machinery
Agricultural machinery
Special machines
Pumps & Generators

Ideal for construction companies, rental companies and logistics fleets.

You can see this data for your construction machine

With VOLT you get, among other things:

Real-time location
Current voltage
Odometer
Operating hours
Idle times
Speed
Motor status on/off
Detects BLE beacons in the vicinity

All data flows directly into the syniotec platform and is visible in SAM & RAM.

Resources & Documents

registered
Users

recorded
Machines

Technical data from VOLT

General information

Power supply
8 V to 32 V DC

Backup battery
2 × 18650 Li-ion battery
3.7 V, 5800 mAh

Temperature
Operation: -30 °C to +80 °C
Charging: +10 °C to +45 °C

Weight
320 g

Size (L×W×H)
138 × 66 × 38 mm

Water resistance
IP67

Certifications

Integrations

Digital inputs
1 positive trigger input for ignition detection

Analog input
1 Analog input (0 V – 32 V)

Current output
1 current output (3.3 V) for external devices

Digital inputs/outputs
4 negative trigger inputs for normal use
or 4 open-drain outputs
150 mA maximum drive current

Serial connection
1 RS232 connection

GNSS antenna
internal only

BLE antenna
internal only

LED display
CEL, GNSS, PWR

Mobile network

Operating belt

Cat M1:
LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85

Cat NB2:
LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B66/B71/B85

Data transmission

eMTC (DL) 588 Kbps
eMTC (UL) 1119 Kbps
NB2 (DL) 127 Kbps
NB2 (UL) 158.5 Kbps
NB1 (DL) 32 Kbps
NB1 (UL) 70 Kbps

EGPRS

Frequency
EGPRS 850 / 900 / 1800 / 1900 MHz

Data transmission
eGPRS: (DL) 107 Kbps / (UL) 85.6 Kbps
EDGE: (DL) 296 Kbps / (UL) 236.8 Kbps

GNSS

GNSS chipset
u-blox All-in-One GNSS receiver

GNSS system
GPS, Glonass, Beidou, Galileo

Sensitivity
Cold start: -148 dBm
Hot start: -160 dBm
Tracking: -167 dBm

Position accuracy (CEP)
Autonomous: < 2 m

TTFF (open sky)
Cold start: Ø 24 s
Warm start: Ø 21 s
Hot start: Ø 1 s

FAQs

What is the purpose of the telematics boxes?

The telematics boxes are used to transfer the machine data to our SAM software and our RAM solution for construction machinery rental companies. The devices send information such as live location and technical data, such as operating hours, which can be conveniently accessed through the app.

Why are there different telematics boxes?

Since construction machinery varies widely, we at syniotec have developed different versions of telematics boxes, each tailored to specific types of construction machines. Which ones are ultimately suitable is discussed individually between syniotec and the customer during the planning stage.

How do I obtain the machine data?

Depending on the device, there are various options for reading out the machine data. CORE and LINK send the data actively and independently. For passive tags there are our TAGS with these options:

QR: Quick Response (=QR) is a two-dimensional code on the telematics device. This code is scanned with our app to access the individual device profile with all the information.
NFC: NFC stands for Near Field Communication and enables contactless exchange over a short distance. The smartphone is simply held up to the device to call up the information.

Hardware for every application

Edge

Ideal for construction machinery such as excavators or wheel loaders.

Link

Ideal for attachments such as vibratory plates or shovels.

OBD

Ideal for cars and trucks.

Passive telematics

Direct access to the device profile.

Digital access to your equipment

In addition to the IoT, which reliably sends central data to SAM & RAM, we offer passive telematics. Clearly visible on the equipment, these enable digital access to the individual device profile via QR and NFC scan. We also offer different variants:

TAGS for construction machinery and large equipment
TOOL-TAGS for tools and small equipment
Chain-TAGS for heavy chains
QR-Sticker

Fewer construction sites on construction sites

A partnership, that lasts!

Over 50 companies and partners trust our solutions.