CORE
Telematics for trucks
Keep an eye on your entire fleet at all times with robust truck telematics and global connectivity.
- Live tracking & CAN bus vehicle data in real time
- Automatic operating hours & usage analysis
- Installation in under 1 hour
CAN bus data
Real-time data from the vehicle - incl. tachograph, error messages and much more.
Bluetooth®
Bluetooth®: BLE 5.2 positioning for beacons
Live GPS tracking
Always know where your devices are
Global network coverage
LTE CAT1 with 2G (GSM) fallback
Operating hours recording
Automatically document operating hours and idle times
Waterproof and weatherproof
Withstands weather and adverse conditions
What equipment is CORE suitable for?
CORE has been specially developed for vehicles where vehicle data, CAN bus information and usage analysis are crucial.
Ideally suited for:
- Trucks & tractor units
- Special machines with vehicle electronics
- Commercial vehicles used on construction sites and in logistics
Ideal for construction companies, logistics fleets and operators of heavy commercial vehicles.
You can see this data for your construction machine
With CORE you get, among other things:
- Real-time location
- Mileage
- Tachograph data
- Operating hours & idle times
- Speed
- Motor status on/off
- Error messages
- Alarm messages in the event of accidents
- Usage and transaction data
Resources & Documents
users
assets
Technical data from CORE
General information
Power supply
8 V to 32 V DC
Internal battery
Li-Polymer, 250 mAh
Temperature
Operation: -30 °C to +70 °C
Storage: -40 °C to +80 °C
Weight
92 g
Size (L×W×H)
94 × 58.5 × 21 mm
Integrations
Digital inputs
1 positive trigger input for ignition detection
3 negative trigger inputs for normal use
Analog input
1 analog input (0 V – 16 V)
1 analog input (0 V – 30 V)
Digital output
1 digital output
Interlocked digital output
1 × digital output with internal interlock circuit, open drain, 150 mA max. driver current
Serial connection
1 × RS232
1 × RS485
GNSS antenna
internal only
BLE antenna
internal only
LED display
CEL, GNSS, PWR, CAN status
Certifications
Mobile network
Operating band
LTE-FDD:
B1/B2/B3/B4/B5/B7/B8/B20/B28
Data transmission
LTE-FDD:
Max 10 Mbps (DL)
Max 5 Mbps (UL)
GSM
Frequency
850/900/1800/1900 MHz
Data transmission (GSM)
EDGE:
(DL) Max 236.8 Kbps
(UL) Max 236.8 Kbps
GNSS
GNSS chipset
u-blox All-in-One GNSS receiver
GNSS system
GPS, Glonass, Beidou, Galileo
Sensitivity
Cold start: -148 dBm
Hot start: -160 dBm
Tracking: -167 dBm
Position accuracy (CEP)
Autonomous: < 2 m
TTFF (open sky)
Cold start: Ø 24 s
Hot start: Ø 1 s
FAQs
What is the purpose of the telematics boxes?
The telematics boxes are used to transfer the machine data to our SAM software and our RAM solution for construction machinery rental companies. The devices send information such as live location and technical data, such as operating hours, which can be conveniently accessed through the app.
Why are there different telematics boxes?
Since construction machinery varies widely, we at syniotec have developed different versions of telematics boxes, each tailored to specific types of construction machines. Which ones are ultimately suitable is discussed individually between syniotec and the customer during the planning stage.
How do I obtain the machine data?
Depending on the device, there are various options for reading out the machine data. CORE and LINK send the data actively and independently. For passive tags there are our TAGS with these options:
- QR: Quick Response (=QR) is a two-dimensional code on the telematics device. This code is scanned with our app to access the individual device profile with all the information.
- NFC: NFC stands for Near Field Communication and enables contactless exchange over a short distance. The smartphone is simply held up to the device to call up the information.
Hardware for every application
Edge
Ideal for construction machinery such as excavators or wheel loaders.
Link
Ideal for attachments such as vibratory plates or shovels.
OBD
Ideal for cars and trucks.
Passive telematics
Direct access to the device profile.
Digital access to your equipment
In addition to the IoT, which reliably sends central data to SAM & RAM, we offer passive telematics. Clearly visible on the equipment, these enable digital access to the individual device profile via QR and NFC scan.
We also offer different variants:
- TAGS for construction machinery and large equipment
- TOOL-TAGS for tools and small equipment
- Chain-TAGS for heavy chains
- QR-Sticker
Cut the chaos on your construction site.
Software for construction companies
Easy to use and a complete overview for your construction company: Start digitizing and automating your processes with SAM today. More about SAM
Software for construction rental companies
RAM was developed specifically for the construction equipment rental industry. Analysis, tracking, digital handover reports: All in one software solution. More about RAM
Telematics for construction equipment
IoT devices for optimal tracking and fleet management. Key machine data is displayed directly in SAM & RAM. Suitable for every asset in your fleet. More about our IoT
