VOLT
Telematics for trailers & mobile machines
Full transparency of assets with their own power supply or without a fixed connection.
- Live tracking & automatic recording of operating hours
- Long battery life without external power source
- Installation in approx. 15 minutes
Bluetooth®
Bluetooth®: BLE 5.0 positioning for beacons
Long-life battery
Lasts up to four months without an external power source
Live GPS tracking
Always know where your devices are
Global network coverage
LTE CAT M1/NB1 with 2G fallback
Operating hours recording
Automatically document operating hours and idle times
Waterproof and weatherproof
Withstands weather and adverse conditions
What equipment is VOLT suitable for?
VOLT is ideal for assets that are used on the move or do not have a permanent power source:
- Trailer
- Lifting technology
- Construction machinery
- Agricultural machinery
- Special machines
- Pumps & Generators
Ideal for construction companies, rental companies and logistics fleets.
You can see this data for your construction machine
With VOLT you get, among other things:
- Real-time location
- Current voltage
- Odometer
- Operating hours
- Idle times
- Speed
- Motor status on/off
- Detects BLE beacons in the vicinity
Resources & Documents
users
assets
Technical data from VOLT
General information
Power supply
8 V to 32 V DC
Backup battery
2 × 18650 Li-ion battery
3.7 V, 5800 mAh
Temperature
Operation: -30 °C to +80 °C
Charging: +10 °C to +45 °C
Weight
320 g
Size (L×W×H)
138 × 66 × 38 mm
Water resistance
IP67
Certifications
Integrations
Digital inputs
1 positive trigger input for ignition detection
Analog input
1 Analog input (0 V – 32 V)
Current output
1 current output (3.3 V) for external devices
Digital inputs/outputs
4 negative trigger inputs for normal use
or 4 open-drain outputs
150 mA maximum drive current
Serial connection
1 RS232 connection
GNSS antenna
internal only
BLE antenna
internal only
LED display
CEL, GNSS, PWR
Mobile network
Operating belt
Cat M1:
LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85
Cat NB2:
LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B66/B71/B85
Data transmission
eMTC (DL) 588 Kbps
eMTC (UL) 1119 Kbps
NB2 (DL) 127 Kbps
NB2 (UL) 158.5 Kbps
NB1 (DL) 32 Kbps
NB1 (UL) 70 Kbps
EGPRS
Frequency
EGPRS 850 / 900 / 1800 / 1900 MHz
Data transmission
eGPRS: (DL) 107 Kbps / (UL) 85.6 Kbps
EDGE: (DL) 296 Kbps / (UL) 236.8 Kbps
GNSS
GNSS chipset
u-blox All-in-One GNSS receiver
GNSS system
GPS, Glonass, Beidou, Galileo
Sensitivity
Cold start: -148 dBm
Hot start: -160 dBm
Tracking: -167 dBm
Position accuracy (CEP)
Autonomous: < 2 m
TTFF (open sky)
Cold start: Ø 24 s
Warm start: Ø 21 s
Hot start: Ø 1 s
FAQs
What is the purpose of the telematics boxes?
The telematics boxes are used to transfer the machine data to our SAM software and our RAM solution for construction machinery rental companies. The devices send information such as live location and technical data, such as operating hours, which can be conveniently accessed through the app.
Why are there different telematics boxes?
Since construction machinery varies widely, we at syniotec have developed different versions of telematics boxes, each tailored to specific types of construction machines. Which ones are ultimately suitable is discussed individually between syniotec and the customer during the planning stage.
How do I obtain the machine data?
Depending on the device, there are various options for reading out the machine data. CORE and LINK send the data actively and independently. For passive tags there are our TAGS with these options:
- QR: Quick Response (=QR) is a two-dimensional code on the telematics device. This code is scanned with our app to access the individual device profile with all the information.
- NFC: NFC stands for Near Field Communication and enables contactless exchange over a short distance. The smartphone is simply held up to the device to call up the information.
Hardware for every application
Edge
Ideal for construction machinery such as excavators or wheel loaders.
Link
Ideal for attachments such as vibratory plates or shovels.
OBD
Ideal for cars and trucks.
Passive telematics
Direct access to the device profile.
Digital access to your equipment
In addition to the IoT, which reliably sends central data to SAM & RAM, we offer passive telematics. Clearly visible on the equipment, these enable digital access to the individual device profile via QR and NFC scan.
We also offer different variants:
- TAGS for construction machinery and large equipment
- TOOL-TAGS for tools and small equipment
- Chain-TAGS for heavy chains
- QR-Sticker
Cut the chaos on your construction site.
Software for construction companies
Easy to use and a complete overview for your construction company: Start digitizing and automating your processes with SAM today. More about SAM
Software for construction rental companies
RAM was developed specifically for the construction equipment rental industry. Analysis, tracking, digital handover reports: All in one software solution. More about RAM
Telematics for construction equipment
IoT devices for optimal tracking and fleet management. Key machine data is displayed directly in SAM & RAM. Suitable for every asset in your fleet. More about our IoT
