DOT

BLE Beacon for small machines & devices

Keep an eye on all your equipment at all times – with Bluetooth tracking directly in the syniotec platform.

Bluetooth®

Supports BLE 5.1 with individual transmission interval from 0.1 to 10 seconds.

Robust & compact

Ideal for the construction site, DOT withstands weather and adverse conditions.

Simple installation

Can be simply screwed on or glued on .

What equipment is DOT suitable for?

DOT was specially developed for equipment that was previously difficult to record digitally and did not have its own power connection.

Ideally suited for:

Ideal for construction companies, landlords and workshops.

You can see this data for your construction machine

With DOT you get, among other things:

All data flows directly into the syniotec platform and is visible in SAM & RAM.

Resources & Documents

software
users

registered
assets

Technical data from DOT

General information

Housing material
ABS plastic

Size (L×W×H)
Ø 46 × 40 × 18 mm

Weight
24 g ± 1 g

Waterproof
according to IP67

Temperature (operation)
-20 to +60 °C

Battery & performance

Supported battery types
1× CR2477

Internal battery
1000 mAh

Battery operating time
8 years, at a transmission frequency of 10 s, 7 dB transmission power and 3-axis accelerometer switched off

Operating current (at a transmission interval of 2 s)
26 µA (with 3-axis accelerometer switched off)
65 µA (when all sensors are on)

Certifications

Connectivity

Bluetooth®
BLE 5.1

BLE transmission interval
0.1 – 10 s (standard: 2 s)

NFC
is supported

Transmission range
up to 100 m (at maximum transmission power in open terrain)

Transmission power
-20 – 7 dB (standard: 7 dB)

3-axis accelerometer
is supported

FAQs

What is the purpose of the telematics boxes?

The telematics boxes are used to transfer the machine data to our SAM software and our RAM solution for construction machinery rental companies. The devices send information such as live location and technical data, such as operating hours, which can be conveniently accessed through the app.

Why are there different telematics boxes?

Since construction machinery varies widely, we at syniotec have developed different versions of telematics boxes, each tailored to specific types of construction machines. Which ones are ultimately suitable is discussed individually between syniotec and the customer during the planning stage.

How do I obtain the machine data?

Depending on the device, there are various options for reading out the machine data. CORE and LINK send the data actively and independently. For passive tags there are our TAGS with these options:

QR: Quick Response (=QR) is a two-dimensional code on the telematics device. This code is scanned with our app to access the individual device profile with all the information.
NFC: NFC stands for Near Field Communication and enables contactless exchange over a short distance. The smartphone is simply held up to the device to call up the information.

Hardware for every application

Edge

Ideal for construction machinery such as excavators or wheel loaders.

Link

Ideal for attachments such as vibratory plates or shovels.

OBD

Ideal for cars and trucks.

Passive telematics

Direct access to the device profile.

Digital access to your equipment

In addition to the IoT, which reliably sends central data to SAM & RAM, we offer passive telematics. Clearly visible on the equipment, these enable digital access to the individual device profile via QR and NFC scan.

We also offer different variants:

Cut the chaos on your construction site.

A partnership, that lasts!

Over 100 companies and partners trust our solutions.

DOT